This is rick with custom, concrete design and lake of the ozarks. This week we’re over here in greenview. We’ll, probably be here this weekend. Next week week got to do this outside patio.

There’s, a couple of different slabs poured at different times, so this whole thing is going to be a flagstone pattern. When we’re done with it got a few cracks to repair in both slabs got this area right here.

As you can see, you’ve got to fill that in there’s, a crack that runs there on over to here, and there’s. Another one right here, you know, but we ‘ Ll grind all this stuff off and get it back down to uh.

You know a little bit nicer concrete and get everything repaired there’s. A crack right out here on this outside perimeter on this older slab here and i think there’s, one or two running through the center all right.

Well, we’re about at the halfway point with this project. Everything’s prepped and ready to go for the tack coat that’s, going to go over the pattern tape spent about a day and a half taping. This pattern out.

It’s all hand, taped different size stones, but everything’s, ready to spray that tack coat on. So we’re gonna seal. This tape down that way. Our lighter coat that goes on top won’t, get up underneath this tape, so that’s.

What we call a lock, coat or tap code, so everything’s, set up and ready to go workstations ready. Let’s, go okay. We have our tack coat on this left side over here is obviously still wet. That’s. Why? I ended came here to the very end at my mixing station and stopped that’s.

Why it’s a little darker and over there, as you can tell if you can see through the shadowing, i’ll step on over there because it is dry, but it’s lighter it’s kind Of crunchy because i sprayed it on, but it’s uh.

You know it’s, locked that tape down. So now there’s, a thin layer over the top of it, and that’s. That’s kind of the stage we’re at the next coat is going to be our texture coat. So, okay, we’ve wrapped up this job over here in greenview, got a flagstone pattern or just maybe a random rock pattern.

Some pieces are kind of rounded some of the rocks and some of them have points to them. Some of them are triangular, so we just did just kind of a random rock pattern. I guess you could say it’s starting to rain now, so i’m.

Probably gonna have to make this pretty quick. If you guys are watching this on my youtube channel, please subscribe to my channel like the video. If you like the work and leave me a comment, let me know what you think of the work uh the website.

This is in the description below, along with my facebook page as well uh. You can go over and check that out like that page over on facebook and go to my website and just get more information other than that, if you guys are actually on the website.

You can head on over to my youtube channel and uh, get subscribed yeah it’s. Coming down now hear that thunder anyways i’m gonna wrap this up. Hopefully i didn’t, go too quick and you guys can see this pretty good.

We’ll, see you guys on the next project.

Resurfacing Concrete